| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Year |
| Max Diameter of Workpiece: | None |
| Mass Scope of Workpiece: | None |
| Type: | None |
| Maxcapacity: | None |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
YD5010 plus is a domestic grating spectrometer with 45/0 geometric optical structure independently developed by 3nh company and fully owns independent intellectual property rights. It fully complies with the standard ISO 5-4 and supports the MO,M1, M2,M3 test conditions stipulated by ISO 13655 standard. ISO Status T, E, A, I density measurements can be accurately achieved.
YD50 series instruments stable, measuring density, chroma data accurate, powerful, portable spectral density instrument equipped with a variety of measuring caliber, in ink printing factory, paper factory, traffic signpost industry, textile and clothing printing and dyeing industries, in scientific research institutions, quality testing institutions, laboratory fields are widely used.
In the CIE recommended 45/0 geometric optical lighting conditions, based on the ISO 13655 standard M0,M1,M2,M3 test conditions, the instrument can accurately measure the reflectivity data of the sample, in a variety of color space, can accurately measure and express a variety of density indicators, color difference formula, color index. The instrument is also widely used in color difference quality control of various products. The instrument is equipped with high-end color management software, connected to the computer to use, to achieve more functions.
Grating spectrometer YD5010 plus features
1.45/0 Geometric optical structure, in accordance with CIE No.15, support the ISO 13655 standard MO,M1, M2,M3 test conditions, accurate realization of ISO T, E, A, I density measurement;
2. Beautiful appearance and structure design in line with human mechanics;
3. Combination LED light source with high life and low power consumption, including UV light;
4. A single custom diameter Φ2/4/8mm can be selected at will to adapt to more tested samples;
5. Measure sample reflection spectrum,CMYK density and Lab data are accurate, which can be used for accurate color transmission;
6. High electronic hardware configuration :3.5 "TFT true color screen, capacitive touch screen, concave grating, 256 pixel dual array CMOS detector;
7.USB communication mode, wider adaptability;
8. Dirt resistant, stable standard whiteboard;
9. Large storage space, can store more than 10,000 test data
10. Two standard observer angles, a variety of light source modes, a variety of color systems, in line with a variety of standard chroma indicators, to meet the needs of various customers for color density measurement;
11. Especially suitable for printing plant process control, quality control;
12. The PC side software has powerful function expansion;
It is widely used in ink, printing, film processing, textile dyeing, plastic electronics and other industries for accurate color measurement and quality control, as well as in scientific research institutions, quality testing institutions, laboratories; especially suitable for precise measurement and quality control of optical density and dot enlargement in ink printing.
| Model | YD5010plus |
| Measurement Geometry | 45/0(45 ring-shaped illumination, 0 degree viewing angle); ISO 5-4,CIE No.15 |
| Features | Common spectrophotometer densitometer, apply in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing;able to customize single aperture Φ2mm,Φ4mm,Φ8mm. |
| Light Source | Combined LED Light, UV Light |
| Spectral separation device | Concave Grating |
| Detector | 256 Image Element Double Array CMOS Image Sensor |
| Wavelength Range | 400~700nm |
| Wavelength Pitch | 10nm |
| Half Bandwidth | 10nm |
| Measurement Conditions | Compliance with ISO 13655 measurement conditions; M0 (CIE Light Soure A) M1 (CIE Light Soure D50) M2 (Excluding UV light source) M3 (M2+Polarized light filter) |
| Density Standards | ISO Status A, E, I, T |
| Density index | Density value, density difference, dot area, dot enlargement, overprint, printing characteristics, printing contrast, tone error and gray level |
| Measurement aperture | Customized one aperture:Φ2mm,Φ4mm,Φ8mm optional |
| Color Spaces | CIE LAB,XYZ,Yxy,LCh |
| Color Difference Formula | ΔE*ab,ΔE*94,ΔE*00 |
| Other Colorimetric Index | / |
| Observer Angle | 2°/10° |
| Illuminants | A,C,D50,D55,D65,D75,F2,F7,F11,F12 |
| Measurement Time | About 1.5s |
| Repeatability | Density: Within 0.01 D |
| Chromaticity value:within ΔE*ab 0.04 ( When a white calibration plate is measured 30 times at 5 second intervals after white calibration) Except M3 | |
| Inter-instrument Error | Within ΔE*ab 0.2 (Average for 12 BCRA Series II color tiles) Except M3 |
| Measurement mode | Single Measurement, Average Measurement(2-99) |
| Size(L*W*H) | 184*77*105mm |
| Weight | About 600g |
| Power source | Li-ion battery. 5000 measurements within 8 hours |
| Illuminant Life Span | 5 years, more than 3 million times measurements |
| Display | 3.5-inch TFT color LCD, Capacitive Touch Screen |
| Interface | USB, |
| Data memory | 10000 pcs |
| Language | Simplified Chinese, English, Traditional Chinese |
| Working Environment | Temperature: 0~40ºC; Humidity: 0~85% (No Condensation);altitude: less than 2000 m |
| Storage Environment | Temperature: -20~50ºC; Humidity: 0~85% (No Condensation)) |
| Standard Accessory | Power Adapter, USB Cable, Built-in li-ion battery, User Manual, software(download from the website),White and Black Calibration Board, Protective Cover,Polarization filter box,Locating Plate |
| Optional Accessory | Micro Printer |
| Notes: The specifications are subject to change without notice. | |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}